Uniview GCB01-B7 Link Pro Connect Box 4x Ethernet, WiFi Hotspot, Live View & IP Management

The ConnectBox is a portable tool that’s a must for any camera set ups. Think of it as your own mini network that you carry in one hand. You power a UNV camera from the DC 12V 1A output or PoE up to 12W. Then connect straight to it over the built-in WiFi hotspot and open UNVLink Pro.

In a few minutes you’ve set the IP, updated firmware, tuned Wise-ISP, and saved the profile.

No client network needed. No waiting on IT.

Port 4 reads PSE voltage from 1 to 56 V, so you can prove if a so called PoE port is actually delivering.

The DC input checks 1 to 56 V too, so you can confirm a supply without pulling out a separate metre.

If the numbers aren’t there, you’ve got it in black and white and you move on. If they are, you know it’s a config issue and you fix it on the spot with the app.

It also pays its way on pre-staging.

Sit at the bench or in the van, plug up to four devices, and build the job before you ever unbox a site switch.

7500 mAh keeps you running, it charges by USB-C at up to 2A, and there’s a 5V 1A USB-A if your phone needs a top up.

And the whole thing is 130 x 85 x 33mm. It lives in your bag without ready for the next callout.

The real outcome for you is time and convenience.

You can prove power on site and sort settings there and then without a laptop.

Easier client conversations because you can show live view on your phone without touching their network.

Add It To Your Tool Kit!